|
|
BLACK BODY CERAMIC
INFRARED HEATERS
Wattage-Surface
Temperature Chart
| Catalog
Number |
A-1-1000 |
A-1-650 |
A-1-400 |
A-2-500 |
A-2-325 |
| Wattage |
1000 |
650 |
400 |
500 |
325 |
| Average Surface
Temperature |
750°C 1380°F |
630°C 1165°F |
510°C 950°F |
750°C 1380°F |
630°C 1165°F |
| Maximum
Allowable Surface Temperature |
800°C
1470°F |
700°C
1290°F |
565°C
1050°F |
800°C
1470°F |
700°C
1290°F |
| Peak Wave Length
(µm) |
2.9 |
3.2 |
3.7 |
2.9 |
3.2 |
 |
The maximum efficiency
of the Black Body Ceramic Infrared Heater converts almost every
watt of applied energy into radiant energy. Convection losses
are minimal. Sheath temperatures can be controlled and the process
can be zoned with a built-in thermocouple. The wavelength can
be matched to specific absorption characteristics of the material
being heated. Heat losses and changes in process requirements
can also be compensated for. |
* Flat Profile
Catalog
Number |
Wattage |
Voltage |
X |
| A-1-1000 |
1000 |
220/230 |
9-5/8" |
| A-1-1000-4 |
1000 |
480 |
9-5/8" |
| A-1-650 |
650 |
220/230 |
9-5/8" |
| A-1-650-1 |
650 |
120 |
9-5/8" |
| A-1-650-4 |
650 |
480 |
9-5/8" |
| A-1-400 |
400 |
220/230 |
9-5/8" |
| A-2-500 |
500 |
220/230 |
4-3/4" |
| A-2-325 |
325 |
220/230 |
4-3/4" |
| AL-3-200-1* |
200 |
120 |
2-3/8" |
|
 |
EL Square Element with
Flat Profile
 |
Black
Body Ceramic Infrared Heater with Holes
5/16" (8mm) holes throughout
surface is practical for radiant heating applications with cooling
requirements or where a 8-7/8" x 12-1/8" (225mm x 308mm)
combination radiant/convective heat source is needed. Air blown
through the surface would provide cooling or convection heat
transfer. 4" ceramic insulated lead wires are provided.
The standard rating is 1500W, 240V, at 14 watts/square inch. |
|