Introduction | Process Heat & Control Systems | Tubular Heaters | Mighty Blade Process Heaters | Pipe Plug Immersion Heaters | Flanged Immersion Heaters | Circulation Heaters | Heat Transfer Systems | Boiler & Water Heaters | Pipe Insert Heaters | Quartz Immersion Heaters | Bottom Mount Immersion Heaters | Dishwasher Heaters | Sink Sanitizer Immersion Heaters | Drum Heaters | Process Air Heaters | Enclosure Heaters


DT & RDT OVER-THE-SIDE IMMERSION HEATERS

Used in tanks where through-the-wall heaters cannot be installed, portability is required, or where heaters must be removed for cleaning without emptying the tank. Suitable for freeze protection, for heating viscous materials to improve flow, or most open tank applications with proper sheath and watt density selection.

Lightweight and portable
Self supporting
All compatible materials
- Stainless steel elements; stainless steel riser
- and junction box
- Incoloy elements; stainless steel riser and
- junction box
- Steel elements; steel riser and junction box
Watertight terminal housing with terminal block
for wiring
Thermowell for installation of thermostat
Sludge legs
.475" diameter elements

Options:
Built-in thermostat: 60-250°F, 15-120°C or 150-550°F
Explosion resistant terminal enclosure
Shorter or longer riser height
Special ratings or materials
Right angle risers
Passivation or other external finishing
Thermocouple for process control or
high limit
Mighty-Blade elements - Consult Ogden

Installation Manual

Kilo-
watts
Volts
3 Phase
A B DT
Catalog #
C RDT
Catalog #
 Stainless Steel Elements 40 watts/sq.in. 
3 120 36 12-1/4 DTS-031-001 10-5/8 RDTS-031-001
240 DTS-032-002 RDTS-032-002
480 DTS-034-003 RDTS-034-003
6 240 36 22-1/4 DTS-062-004 13-3/4 RDTS-062-004
480 DTS-064-005 RDTS-064-005
9 240 36 29-1/2 DTS-092-006 16-1/8 RDTS-092-006
480 DTS-094-007 RDTS-094-007
12 240 48 37-3/8 DTS-122-008 18-5/8 RDTS-122-008
480 DTS-124-009 RDTS-124-009
15 240 48 45 DTS-152-010 21-1/4 RDTS-152-010
480 DTS-154-011 RDTS-154-011
18 240 48 52-1/2 DTS-182-012 23-1/2 RDTS-182-012
480 DTS-184-013 RDTS-184-013
 Incoloy Elements 40 watts/sq.in. 
3 120 36 12-1/4 DTI-031-001 10-5/8 RDTI-031-001
240 DTI-032-002 RDTI-032-002
480 DTI-034-003 RDTI-034-003
6 240 36 22-1/4 DTI-062-004 13-3/4 RDTI-062-004
480 DTI-064-005 RDTI-064-005
9 240 36 29-1/2 DTI-092-006 16-1/8 RDTI-092-006
480 DTI-094-007 RDTI-094-007
12 240 48 37-3/8 DTI-122-008 18-5/8 RDTI-122-008
480 DTI-124-009 RDTI-124-009
15 240 48 45 DTI-152-010 21-1/4 RDTI-152-010
480 DTI-154-011 RDTI-154-011
18 240 48 52-1/2 DTI-182-012 23-1/2 RDTI-182-012
480 DTI-184-013 RDTI-184-013
 Steel Elements 20 watts/sq.in. 
3 120 36 22-1/4 DTO-031-001 13-3/4 RDTO-031-001
240 DTO-032-002 RDTO-032-002
480 DTO-034-003 RDTO-034-003
4.5 240 36 29-1/2 DTO-0452-004 16-1/8 RDTO-0452-004
480 DTO-0454-005 RDTO-0454-005
6 240 36 37-3/8 DTO-062-006 18-5/8 RDTO-062-006
480 DTO-064-007 RDTO-064-007
7.5 240 48 45 DTO-0752-008 21-1/4 RDTO-0752-008
480 DTO-0754-009 RDTO-0754-009
9 240 48 52-1/2 DTO-092-010 23-1/2 RDTO-092-010
480 DTO-094-011 RDTO-094-011
10 240 48 56-1/2 DTO-102-012 24-7/8 RDTO-102-012
480 DTO-104-013 RDTO-104-013



home
| about ogden | products { flexible heaters & band heaters | insertion heaters | process electric heaters | strip heaters & mini-tubular heaters | radiant heaters | controls, sensors & accesories } | what's new | contact ogden

OGDEN MANUFACTURING CO.
103 Gamma Drive, Pittsburgh, PA 15238
phone 800-OMC-4921 or 412-967-3906
fax 888-OMC-9890 or 412-967-3930