 |
140kW system heats
methyl chloride from -70°F to 100°F. The control is critical
because of the nature of the application and the material being
heated. The panel is UL Listed and the circulation heater certified
to ASME boiler and pressure vessel codes. |
 |
This 60kW fluid
heat transfer system is designed for application temperatures
to 650°F. Options included are sight gauges and pressure
gauges. For more information about Fluid Heat Transfer Systems,
click here. |
 |
Each of these 320kW systems was
designed to heat deionized water to 375°F. The system is
pressurized to prevent the water from flashing to steam. The
panel provides staging control, a variable speed drive for the
pump, and power and control wiring. |
 |
83kW system heats
combustion make-up air in a cogenerative application. Burner
efficiency and combustion by-products are tested based on different
temperatures of make-up air. |
 |
This 72kW system
heats high volume of air to 1000°F. The air is piped to a
nuclear reactor core, then returned to be reheated and continues
on in a closed loop. The heated air keeps a bed of salt molten.
The molten salt then cools the rods that contain the radioactive
material. |