|
|
PROCESS HEAT &
CONTROL SYSTEMS
| OGDEN systems are compactly designed, engineered to
be efficient and thoroughly tested to perform to specifications.
Located in Edinboro, Pennsylvania, OGDEN's production facility
has CNC machine tools, ASME certified welders, paint booth, overhead
cranes and all other equipment necessary for the manufacturing
and assembly of large Process Heat and Control Systems. Advanced
design software and an experienced engineering staff provide
extensive technical support including calculations and drawings.
All vessels are hydro tested, all components are thoroughly tested
to specification, then the entire system is tested under power
before shipment. Materials ranging from mild carbon to exotic
alloys are often specified. The selection is based upon temperature,
pressure, corrosion considerations, and metallurgical properties.
Heat treating for stress relief, passivation, cathodic protection,
specialized welding or machining can be provided. Skid mounted
heating assemblies are turnkey systems. Heater connections and
control wiring are complete. Installation is reduced to offloading,
setting the unit in place at the site, and providing process
and electrical connections. Extensive experience in control application
and in the manufacturing and application of tubular heater products
gives OGDEN the capability to design and supply Process Heating
Systems for the most difficult and unusual applications imaginable. |
 |
260kW, 3-stage system heats a
gaseous hydrocarbon mixture in a refinery. To protect the termination
from excessive temperatures due to the heated flow being directed
toward the flange, a stand-off design of the terminal enclosure
was used. The control panel is remote from the system. |
 |
400kW, 2 stage Circulation System
and Control Panel to heat 33gpm of water to 130°F prior to
delivery to steam boiler in electric power plant |
 |
36kW fully enclosed heat transfer
system. The system includes framework, circulation heater, buffer
and expansion tanks, pump, interconnection piping, isolation
valves and control panel. |
 |
425kW, 2 stage system used to
superheat steam prior to delivery to a turbine generator. The
system was used temporarily during a boiler repair, but was eventually
moved for full time use. |
 |
This 12kW Heat Transfer System
heats a food grade oil in a closed loop system. The oil is pumped
through jacketed pipes and tanks to maintain ingredient temperatures
in a food processing plant. Features include a 125gpm pump, 20
gallon expansion tank, sight glass, isolation valve and shut-off
valves. |
 |
25kW explosion proof, portable
system for heating nitrogen to 250°F for a process at the
Kennedy Space Center. |
 |
Air is heated to 1400°F with
this 4 stage, 170kW system. The vertical mounting was designed
to occupy minimal floor space. |
|