|
Mighty
Watt and Mighty Watt Plus
Cartridge Heaters
Introduction &
Design
Stock Items List
Mighty Watt
Plus
Figure X, A &
D Lead Variations
Figure F, G &
R Lead Variations
Figure U Sheath
Extension
Figure E Epoxy
Seal
Figure M Immersion
Heater
Mighty Watt with
Internal Thermocouple
Figure T &
other Terminal Seals
Figure Y Terminals
& Plug Terminations
Figure W Flange,
B & C Lead Protection
& additional variations
Bullet Cartridge
& Drain Heaters
Cartridge Immersion
Heaters
Specifications
& Limitations
Watt Density &
other Selection Factors
SST &
QST Split Sheath
Insertion Heaters
Introduction
Design
Terminations
Protective Lead
Variations &
Mounting Flange
Specifications
& Limitations
Maxi-Zone
High Temp Insertion Heaters
Introduction &
Design
Independent Heated Zones,
Standard
Diameters & Plugs
Watt
Density vs. Sheath Temperature
Transition
Adaptors & Bending
Watt
Density, Cold Sections &
Heated Lengths
Bolt Heaters
Design & Applications
Standard Products
List
. . . . . .
Flexible
Heaters and Band Heaters
Process Electric
Heaters
Strip Heaters
and Mini-Tubular Heaters
Radiant Heaters
Controls,
Sensors and Acessories
Engineering
and Technical Information
|
Where an intense concentration of heat is required, the Mighty
Watt, SST, QST and Maxi-Zone Insertion Heaters give OGDEN the
broadest array of high density insertion heaters available. More
than 700 stock Mighty Watt sizes and ratings along with the selection
of Mighty Watt Plus terminations get many tens of thousands of
possible cartridge heater variations shipped right away. SST
and QST Split Sheath heaters are designed for applications where
the hole is poorly drilled or worn through age. When energized,
the segments expand, improving conductive heat transfer. When
cool, the segments contract for easy removal. The Maxi-Zone Insertion
Heater can produce 2000°F continuous temperatures. Independently
controllable zones along the sheath length provide precise process
temperatures. With the Mighty Watt, SST, QST and Maxi-Zone, OGDEN
can supply the ideal heat source for any insertion heater application.
 |
OGDEN MANUFACTURING CO.
103 Gamma Drive, Pittsburgh, PA 15238
phone 800-OMC-4921 or 412-967-3906
fax 888-OMC-9890 or 412-967-3930 |
|