 Screw
Terminals and Box Protection:
1/4-20 x 1" threaded terminals
are standard as in Fig. S or in terminal box as in Fig. B. Under
2" width, terminals are parallel to circumference. Over
2", terminals are perpendicular to circumference. Standard
position is 180° from gap. Specify alternate position.
Braid or Conduit Protection:
To protect leads against abrasion, braided sleeve in Fig. L.
is held in place by a clip. Conduit in Fig. A is connected to
stand off bracket. Standard position is 180° from gap. Specify
alternate position. Standard length is 12" braid or cable
with 14" leads.
Overlap Flange:
For thermocouple probe hole located through gap as per Fig. F.
Leads:
Fiberglass insulated lead wires held in place by a clip as per
Fig. D. Standard position is 180° from gap. Specify alternate
position.
|