|
|
MOUNTING
Type L Mounting Flange
Standard on all Mighty-Tuff Band Heaters. Supplied with 5/16
Socket Head Cap Screw. |
Type S
Mighty-Tuff Band Heaters are available with 5/8" wide straps.
Some dimensional restrictions may apply based on lead type, position
and width. |
Type BL
Low Profile Barrel Nut Assembly Welded to Sheath with 6 - 32
screw. |
Type BW
1-1/4" Wide Barrel Nut Assembly Welded to Sheath with 5/16
- 18 socket head screw. |
Type BN
Standard Profile Barrel Nut Assembly Welded to Sheath with 10
- 32 screw. |
Type BT
Quick Release Barrel Nut Assembly Welded to Sheath with 1/4 -
20 bolt. |
Type BR
Quick Release Assembly with Spring Loaded Screw Welded to Sheath
with 1/4 - 20 screw. |
Other Options
· Full length fiberglass sleeving
· Ground
Wire
· Ceramic
Terminal Covers
· Standard
NEMA Plugs
· Built-in
Thermocouple
|
 |
Recommended Maximum
Watt Density for 1-1/2" Wide Mighty-Tuff Band Heaters:
· Cycled moderately.
· Tightly clamped on a smooth surface.
· For units over 2" in width, multiply watt density
by 0.8.
· Where insulating blankets are used, multiply watt
density by 0.7.
· See the technical section for estimating watt density.
|
|
Diameter |
Minimum
Width |
| Minimum |
Maximum |
| Full Band |
1" |
14" |
1" |
One
Piece
Expandable (Type E) |
3" |
14" |
1" |
| Two Piece Type T |
3" |
26" |
1" |
| Type
SG Terminals |
1-1/2" |
-- |
2" |
| Type SH Terminals |
1-1/2" |
-- |
1-1/2" |
| Type
F Leads |
1" |
-- |
1" |
| Type A Leads |
1" |
-- |
1" |
| Type
P Leads |
1" |
-- |
1" |
| Type R Leads |
1" |
-- |
1" |
| Type
C Leads |
1" |
-- |
1" |
| Terminal Box |
3-1/2" |
-- |
1-1/2" |
| Type
110 |
3-1/2" |
-- |
1-1/8" |
| Type 115 |
4" |
-- |
2" |
Minimum
width: 1", Maximum width: 6".
Standard
gap: 1/4" - 1"
depending upon I.D.
  (PDF file - 10k)
|