Thickness of Optional Silicone Sponge Insulation:
1/8", 1/4", or 1/2"
Thickness of Optional Foil Backing:
0.005" (0.13mm).
|
The area
where leads are attached adds additional thickness depending
upon gauge wire used and type. Consult Ogden.
Dimension Tolerances:
Less than 6" (150mm); ±.03"
(± .8mm);
6 - 12" (150mm - 305mm); ±.06"
(±1.5mm);
12 - 36" (305mm - 915mm); ±.12" (±3.5mm);
Over 36" (915mm); ±1%
12" leads are standard. Gauge of wire to be determined based
on amperage or other considerations.
Composite Bonding Processes and other applications
may require special heat pattern or uniformity. Heat Mapping
Certification is available as an option. Underwriter's Laboratory and CSA recognition or listing apply to most configurations.
As an option, OGDEN can certify to CE. Consult Ogden.
 (PDF file
- 56k)
|